How do I resolve an IPv6 address?

How do I resolve an IPv6 address?

To resolve IPv6 addresses, DNS uses the AAAA record. The AAAA record can store a 128-bit address and can resolve IPv6 addresses.

Can you geolocate an IPv6 address?

Google offers their Geolocation API and Geocoding API that can perform geolocation based on IPv4 or IPv6 addresses and Google Maps has a wide variety of application integrations. Just like all IPv6 location systems, they have had challenges and are constantly making improvements to the accuracy of their systems.

Can you spoof an IPv6 address?

These are efficient anti-spoofing measures; however, spoofing is still possible because IPv6 networks have not completely replaced IPv4 networks as they support IPv4 through tunnelling, transition, and translation.

Does nslookup work with IPv6?

You can use the nslookup command to display IPv6 name service information. Under your user account, run the nslookup command. The default server name and address appear, followed by the nslookup command’s angle bracket prompt. Quit the nslookup command by typing exit .

Does IPv6 need DNS?

With so much information on IPv6 focusing on connectivity, it’s sometimes important to remember that deploying IPv6 for actual use requires changes to the Domain Name System(DNS) as well.

Is IPv6 more specific than IPv4?

Research revealed that IPv4 address information is more precise than that for IPv6 addresses. That could be due primarily to differences in their volume. The vast number of IPv6 addresses could be affecting their accuracy as some have suggested.

What is IPv6 spoofing?

Router Advertisement Spoofing. If an attacker sends spoofed Router Advertisements inside a subnet, all IPv6 nodes will immediately change their routing tables and store the attacker as one of the default routers. If they send traffic to the Internet, this new default router will be used.

Is MAC and IP address spoofing in IPv6?

Abstract Internet Protocol version 6 (IPv6) uses Network Discovery Protocol (NDP) to find the Media Access Control (MAC) address to communicate with hosts in a LAN. By using spoofed MAC addresses, a malicious host can also launch Denial-of-Service (DoS), Man-in- the-Middle(MiTM) attacks etc. in IPv6 network.

How do I display ipv6?

Displaying the IPv6 route table

1. To display the IPv6 route table, use the show ipv6 route command.
2. To display a summary of the IPv6 route table, enter the show ipv6 route summary command.
3. The command-line interface (CLI) output of the show ipv6 route summary command displays the following information.

What is IPv6 address type?

IPv6 defines the following address types: Unicast address. An identifier for a single interface. A packet sent to this address is delivered to the identified interface. The unicast addresses are distinguished from the multicast addresses by the value of the high-order octet.

Should I configure an IPv6 DNS server for my internal network?

For users with both IPv4 and IPv6 on their internal network, we would recommend that you do not configure an IPv6 DNS server if possible, in order to force your clients to use IPv4 for DNS.

Does OpenDNS support recursive IPv6 DNS resolution?

Are they 6001:0:ccc:2? OpenDNS supports recursive IPv6 DNS resolution and security filtering for IPv6 traffic. Our IPv6 DNS server addresses are: Currently, it is not possible for users to register IPv6 addresses in the OpenDNS Dashboard.

Is 2620-119-35-35 a DNS resolver address?

I have tested out now 2620:119:35::35 and 2620:119:53::53. These are not DNS resolver addresses and do not respond on DNS queries. If you configure them, your system might detect this and may fall back to IPv4 in the ideal case. But you will see much delays with everything, because the timeout must be reached first.