What are the dimensions of a Kenmore washer and dryer?
Size. The Kenmore Elite HE3 washer measures 38 inches high, with a depth of 31.5 inches. The height from the bottom of the Kenmore Elite HE3 dryer to the top of the control panels measures 38 inches. The width of the Elite HE3 dryer comes in at 27 inches with a depth of 31.5 inches.
What size is a Kenmore washer model 110?
3.2 cu. ft.
carolraden, most standard for the 110 series washer is 3.2 cu. ft.
How much space is required behind a washing machine?
Around six inches of space behind your washer and dryer is ideal. Space can be saved behind a dryer by installing a periscope dryer vent. This helps ventilate the areas quickly and thus allows the dryer to sit closer to the wall.
How wide is a Kenmore washing machine?
Less than 4 cu. ft. Washer Interior Capacity (cu. ft.)…Dimensions:
| Dimensions: | |
|---|---|
| Shipping Width (in.) | 27 |
| Shipping Height (in.) | 46 |
| Width (in.) | 27.5 |
| Depth (in.) | 27 |
What is the capacity of a Kenmore he3t washer?
HI Matt, your washing machine has a capacity of 4.3 cu ft and you dryer has 7.3 cu ft capacity. I encourage you to visit www.searspartsdirect.com. You can find lots of useful information there by entering your model number. You can view owner’s manuals, parts, troubleshooting, and more.
What is the capacity of a Kenmore 700 Series washer?
Kenmore 700 3 5 Cu Ft Capacity Top Load Washer.
How do you find the cubic feet of a Kenmore washer?
How to Calculate the Cubic Feet of a Washer
- Measure the depth inside the washer with a measuring tape.
- Measure the diameter of the tub.
- Divide the diameter by two, and square it.
- Multiply the number calculated in Step 3 by the depth of the tub.
- Multiply the number calculated in Step 4 by pi to determine the capacity.
How do I find the capacity of my Kenmore washer?
To calculate the capacity (volume) of the tub, you multiply the area by the height. For example if your washer has a tub radius of 10 inches and the height is 14 inches, you would use the mathematical equation below. Area is pi x r-squared = 3.1416 x 10-squared = 3.1416 x 100 = 314.16.
What are washing machine recess dimensions?
What are the aperture measurements for a washing machine? All washing machines fit under a standard height worktop (90cm) and into a 60cm wide housing gap.
How much space do you need around a washer and dryer?
Washers and dryers placed side by side typically require a horizontal space of 60 inches or five feet. Measure the depth of the appliances (most are around 33 inches) and add six inches for hoses and venting. Allow one inch on each side and between appliances to reduce noise from vibrations.
What is the cubic feet of my Kenmore washer model 417?
Kenmore rates the washing drum as an extra-large capacity at 3.1 cubic feet.
What does F11 mean on a Kenmore washer?
F11 is an indication of a communications problem. Communications cannot be sent correctly between the machine control board and the motor control board. Here are some possible causes: Loose wire connection at either the machine control board or motor control board.