How do I know what Fe I have?
The casting number is on the right (passenger) side of the block, in the front. FE (330-428 SCJ) note: nearly all FE blocks have 352 cast on the front of them….Blocks.
| 4TE-C | ’64 – ’77/ 330MD c.i.d. | Medium Duty Truck |
|---|---|---|
| C8AE-C | ’68 – ’76/ 390 c.i.d. | |
| C8AE-E | ’68 – ’76/ 390 c.i.d. | |
| D3TE | ’73 – ’76/ 390 c.i.d. | Reinforcement Webs |
What does Ford FE stand for?
Ford Engine
FE (which means “Ford Engine,” not Ford-Edsel, nor Ford Engineering) variety comes from a broad selection of bore and stroke sizes to achieve cubic-inch displacements. The 390, the most common FE engine, was introduced in 1961 and produced through 1971 for passenger cars and through 1976 for pickup trucks.
How many bolts does a 289 valve cover have?
Tech Tip: This is a set of four (4) valve cover bolts–three sets (12 total bolts) will be needed to complete install onto a 289, 302 or 351W engine.
How do I identify a FE cylinder head?
FE cylinder heads are identifiable by their casting number and date code. This is a C0AE-6090-D cylinder head for 1960 352 and 1961–1962 390. The casting number (bottom arrows) is almost never the same as the Ford part number.
How do you tell if I have a 360 or 390?
If the engine came out of a truck or pickup, it is very likely a 360 engine, as 360s had a higher torque rating and sturdier internal parts, making them ideal for trucks. If the original vehicle was a car or other smaller, lighter vehicle, then the engine very likely is a 390.
How do I identify my FE heads?
Is the Boss 429 a Hemi?
The racing engine dubbed the Boss 429, was an aluminum hemi-head engine design with gigantic ports and valves for high rpm use. The high-torque 429 engine was used in the big Fords and Thunderbirds starting in 1968, then in 1970 a high-performance version was used in the Ford Torinos and Mustangs.
Did Ford make a 427?
Although part of the Ford FE engine family, the 427 SOHC was essentially hand-built for racing yet never made it to a NASCAR-sanctioned event. Although many 427 SOHC-powered Ford Galaxie prototypes appeared from 1964-67, the SOHC Cammer never graced a showroom floor before Ford discontinued it.
How many valve cover bolts does a 302 Ford engine have?
While the standard 302 used six bolts on the valve cover, the Boss 302 has eight bolts. The valve cover was chromed in 1969 and changed in 1970 to cast aluminum.
Where can I buy a valve cover for a Ford FE?
Ansen USA carries a complete line of Ford FE valve covers for your vintage and performance vehicle. From the ever popular Ford Mustang to the old school Ford Fairlane, Thunderbird, and Galaxie, we have a cover that will match your style and flair. Our covers come in black or blue powder coat, as well as a polished aluminum finish.
Will a Ford 390 valve cover fit a Ford 428?
They look like they fit on your normal 390 or 428 with a little work, but they don’t. The valve covers, and hence the gasket surface, are in an altered position and on a different angle than so-called “normal” FE engines.
How many bolts are on a Ford engine cover?
The quickest way of differentiating between the different familys of Ford engines is to simply count the valve cover bolts. 2 bolts: 239/256/272/292/312 (produced from 1954 to 1964) 5 bolts: 332/352/360/361/390/391/406/410/427/428 (FE engine) 6 bolts: 221/260/289/302/351W
What is the difference between Ford FE and FT engines?
Identifying the FE and FT Engines. The Ford Edsel (FE) engine was first used in Ford and Edsel car in 1958 as a 332, 352 or 361. This engine family also includes the 390, 406, 427, 410 and 428. The medium and heavy duty Ford Truck (FT) engine was introduced in 1964 and came in four variations: 330, 361, 389, and 391.