Why is my arrow staple gun not working?
Troubleshooting a staple gun such as the Arrow T50 is often as simple as unclogging a jam in the mechanism. This happens when a staple lodges inside the tool, usually at an angle so that no other staples can come out. Troubleshooting takes only a few minutes using household tools.
Why is my stapler not stapling?
It’s possible that you’re using poor-quality staples that crumple easily, or that the paper you’re using is too thick for the stapler. Make sure you’re using staples with an appropriate strength rating for your staple and that you’re not trying to staple through too many pieces of paper at once.
Why is my stapler not working?
How do you unblock a staple gun?
Clear the jam with needle-nose pliers. Check out the top of the stapler where the staples are discharged. Use the pliers to pinch the staple and pull towards you, pulling the staple out of the stapler’s nose. After that, reassemble the staple gun by putting the magazine back in and screwing in the screw.
How do you fix a stapler problem?
Use a sharp object to push the jammed staple up from the bottom. Any of the following should work: tweezers, scissors, a flathead screwdriver, or needle-nosed pliers. Push the prongs of the jammed staple upward to try and loosen it from the grip of the stapler.
Why choose Arrow t50acd electric staplers?
Unlike traditional electric tools, Arrow’s breakthrough T50ACD electric stapler delivers consistent driving performance regardless of jobsite current fluctuations – even on a 100 foot extension cord. A patent pending motor drive replaces the traditional solenoid design and frees the tool from dependence on a narrow range of power specifications.
What is a T50 staple gun?
T50 Heavy Duty Staple Gun. Arrow’s iconic model T50 is America’s best-selling staple gun. Proudly made in the USA, it features an all chromed steel housing, jam resistant mechanism, powerful coil spring, staple viewing window, and steel working parts hardened in a 1,500 degree furnace.
How do I recock the spring in my arrow T50 stapler?
Ref. recocking the spring handle in your Arrow T 50 Stapler 1. secure the stapler in a vise. You need three hands to recock the handle spring. 2. Using a notched tack lifter hand tool, with one hand holding the handle so as to expose the spring, place the notched tool against the spring arm and force it to the rear. it will now be under tension.
Why use arrow’s T50 gun?
Arrow’s T50 staple gun features chromed steel housing, jam resistance, strong coil springs, & more. It’s ideal for repairs, professional projects, upholstery, insulation and light trim. It can be used on various wood materials, foam, fabric and carpet. Get yours today!