What Delvac 50?
Mobil Delvac 1 Transmission Fluid 50 is a full synthetic, manual transmission lubricant engineered to meet some of the most demanding extended drain and original equipment manufacturer (OEM) warranty requirements. Heavy-duty manual transmissions where extended service intervals and warranties are required.
What fluid goes in a G56 transmission?
The lube of choice is SAE 50 Mobile Delvac 1 Synthetic transmission fluid. It’s also the same lubricant used to refill our ’14 Ram 2500’s G56, which is out of warranty. It takes a little more than 9 quarts once the filter, pump, cooler, and lines are primed.
What is SAE 50 gear oil?
SAE 50 Transmission Oil. NEO SAE 50 Transmission Oil is a long life lubricant formulated with a 100% synthetic base, combined with special additives to provide superior performance in heavy-duty manual truck transmissions. This product is designed for all-climate year-round performance.
How much oil does a G56 transmission hold?
transmission requires 5.9L (6.2 quarts) of fluid. 4. Refill the G56 transmission with Mopar ATF+4.
How much does a G56 transmission weight?
G56 Transmission Specs
| Transmission: | Mercedes-Benz G56 |
|---|---|
| Weight: | ~ 200 to 225 lbs |
| Fluid Capacity: | ~ 4.95 quarts (9.9 pints) |
| Fluid Type/Spec: | MOPAR ATF+4 automatic transmission fluid (recommended by Ram Trucks) SAE 75W/90W gear oil (recommended by Mercedes-Benz) |
| Service Intervals: | Replace transmission fluid every 60,000 miles |
How many quarts of fluid does a G56 take?
What is cd50?
Ultra1Plus™ Transmission Fluid SAE 50 Full Synthetic Manual (CD-50) is a fully synthetic power-shift heavy-duty transmission fluid specially formulated for heavy-duty manual transmissions requiring a non-EP oil in severe service conditions and extended drain applications.
What gear oil is recommended by Eaton for use in their AMTS?
Eaton FE 75W-90 synthetic gear lubricant is an API GL-5 extreme pressure lubricant designed to promote longer gear life and better operating economy, thus improving fuel economy in heavy, mid and light-duty applications.
How long will a G56 last?
There are circumstances where the original clutch in a G56 will last in excess 100k miles. There are also situations where the clutch starts to slip at 15k miles.
Are the G56 a good transmission?
The G56 is a good trans and quiet with stock clutch, tried many fluids in mine and with stock clutch the amsoil mtg is the smoothest best fluid in my experience. Many options for aftermarket clutches which will make it louder in certain situations.
How long does Cutek take to dry?
2-3 days
Once applied, CUTEK® Wood Preservative generally requires 2-3 days of dry conditions after coating to facilitate full penetration/diffusion and an even colour finish; so check your weather forecast before coating.