How do I know if I have Amerock hinges?

How do I know if I have Amerock hinges?

So in order to accurately measure this:

1. Close the cabinet door.
2. Use a pencil to make a light mark on the cabinet frame using the edge of the door as your guide. Make sure you do this on the hinge side of the door.
3. Open the door and measure from that mark over to the edge of the face frame.

What is a Euro style hinge?

European style hinges are a modern high-tech hinge for cabinets. European hinges may also be commonly referred to Blum or Grass hinges, as these are two of the main manufacturers of this type of hinge. They are typically comprised of two parts: the hinge and the mounting plate.

How are European Cabinet Hinges measured?

Measure the Overlay

1. With the door closed, make a pencil mark on the cabinet frame where the edge of the door on the hinge side extends to.
2. Open the door.
3. With a measuring tape or ruler, measure the distance from the inside edge of the cabinet frame to that pencil mark. (It should be 1” or less.)

Where are amerock pulls made?

Based in Rockford, Illinois, Amerock Corporation is a leading U.S. manufacturer of cabinet hardware and storage systems.

How do you adjust old cabinet hinges?

Cabinet Doors Rubbing Against Each Other You can correct the problem by adjusting the hinges on each of the doors. Look for two screws on the hinge. Loosen the screw nearest to the cabinet door a bit—enough to allow you to adjust the hinge to the left or to the right.

How do I know what type of cabinet hinges I have?

The construction of your cabinet – most notably, the overlay of the face frame and the cabinet door – will determine which cabinet hinge you need. Similarly, the location that your drawer slides need to be mounted dictates what type of drawer slide you need.

Is amerock still in business?

In 1987, Amerock was acquired by Newell Corporation (which eventually became Rubbermaid Newell Incorporated). The company continued to introduce new products, including a new line of concealed hinges in 1993. Amerock is currently owned by the Piedmont Hardware group, headquartered in Mooresville, North Carolina.