What is a good base CB antenna?

What is a good base CB antenna?

Solarcon Antron 99 – Best Fiberglass Fiberglass CB antennas are often chosen because they do not get the static interference that can be associated with aluminium antennas. The Solarcon Antron 99 is one of many fiberglass antennas on the market, but this one is the best for many reasons.

Can you put a CB radio antenna in the house?

To get a CB radio for your home or office, your first choice is to buy a CB that’s designed for AC power, such as the Galaxy DX 2547. To save on cost, you can use any mobile CB radio in your base station setup if you add a power supply to your system. A 5-amp power supply works great for powering a 12-volt CB radio.

Can you add SSB to a CB?

A: Yes you can, as long as you no longer use it for CB. Boosting the power and adding the 10 meter ham frequencies is OK for a licensed ham operator to do to his/her own equipment, but it does void the FCC specs and certification for that radio to continue to be used on the Citizen’s Band.

Does a CB antenna have to be grounded?

Ground Your Antenna Mount If you’re using a standard CB antenna (i.e., anything except a no ground plane, or NGP, kit), you’ll need to make sure your antenna mount is solidly grounded to the vehicle’s chassis. To ensure a good ground, check that your mount has a direct metal-on-metal connection to your vehicle’s frame.

How do you increase CB range?

There are several procedures for ensuring maximum output.

1. TUNE THE RADIO. A CB radio is only as good as the coax and antenna connected to it.
2. USE CB-SPECIFIC ANTENNAS.
3. ESTABLISH A GROUND PLANE.
4. CHECK THE VSWR.
5. ELIMINATE RESISTANCE.

Do I need a Licence for a CB radio?

Since 8 December 2006, CB Radio has been exempt from the need to hold a Wireless Telegraphy (WT) Act licence, providing that the equipment is operated in accordance with the technical parameters set out in the regulations. CB users share spectrum which is in a frequency band managed by the Ministry of Defence (MOD).

What does SSB mean on a CB?

single sideband
CB radios in the United States can transmit AM (amplitude modulation) signals, or SSB (single sideband, with suppressed carrier) signals. An AM signal consists of two redundant sideband signals that each contain the operator’s voice, along with a so-called carrier signal between them.

What is SSB on a CB?

CB radios in the United States can transmit AM (amplitude modulation) signals, or SSB (single sideband, with suppressed carrier) signals. An AM signal consists of two redundant sideband signals that each contain the operator’s voice, along with a so-called carrier signal between them.