What does P2 mean on my Canon printer?

What does P2 mean on my Canon printer?

This denotes that an error has occurred transporting the cartridge carriage, which may be caused by any foreign object found such as pieces of wrinkled paper, paper clips, plastic residues of some broken gear, among others.

What does P2 mean on a printer?

P0=After removing a paper jam, another sheet of paper is still jammed in the printer. P1=Paper jam. P2=Two sheets of paper are jammed.

What is P in Canon printer?

Paper is jammed or there is an object inside the printer.

What does P02 mean on a Canon printer ts3322?

When an error code is displayed on the printer’s LCD:

Error Code	Support Code	Cause
E64	–	Scanning original has failed.
E65	–	Saving scanned data failed because the printer’s memory is full.
P02	5100	Printer error has occurred.
P03	6000	Printer error has occurred.

What does P mean in printer?

After installing the printheads, the printer displays a blinking P from the control panel, which indicates that you can start the ink priming process. Before starting the priming process, make sure all the ink tanks are full, the printheads are installed correctly, and paper is loaded in the input tray.

How do I fix P2 error?

Steps to Troubleshoot and Fix a P2 code

1. The first thing to check is for anything blocking the outside and inside ventilation.
2. Reset the unit by shutting the power off and unplugging the unit for 10 minutes.
3. Check the temperature at the top of the compressor.
4. Check for a refrigerant leak.
5. Check for low refrigerant.

What does e3 mean on a Canon printer?

If the orange light is lit and the E03 support code displays on your printer, there is a paper jam.

What does E04 mean on Canon printer?

Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover. Once cartridges have been removed they can be re-install them by firmly pushing them back in until they click into place.

Why does my printer say P?

The printer detects the position of the FINE cartridge holder by the encoder film. If the film is smeared, the holder position cannot be detected properly, resulting in Error P, 0, 2. Check the encoder film condition and clean it if it is smeared, while following the procedures below.

What is P in printer?

What does E36 mean on Canon printer?

Understand and resolve Support and / or Error Codes

Error Code	Support Code	Cause
E33	–	Cannot connect because multiple wireless routers are connecting to the printer.
E34	3440	Easy Wireless Connect has failed.
E36	3441	Easy Wireless Connect has failed.
E37	–	Failed in wireless setup.