Is the Roland mx1 an audio interface?

Is the Roland mx1 an audio interface?

The Roland AIRA MX-1 is not like a standard mixer. It was created with both the studio and the live performer in mind, in addition to working as a high-resolution audio interface and a control surface.

What is AIRA Link?

With fully automatic detection, AIRA Link USB ports transmit audio, MIDI, and sync over a single USB cable. One of the ports can even provide bus power for a compatible AIRA device like the TB-3 Touch Bassline or VT-3 Voice Transformer.

How do I connect MX 1 to my computer?

ご使用になる前に本取扱説明書をよくお読みください。 Please read this instruction manual carefully before using this product. Veuillez lire attentivement ce manuel d’instructions avant d’utiliser ce produit. BEDIENUNGSANLEITUNG Bitte lesen Sie dieses Bedienungshandbuch aufmerksam durch, bevor Sie dieses Produkt benutzen.

How do I project Elmo to my computer?

Power on the Elmo and press the Camera button to project from your Elmo. 2. To switch from the Elmo to the laptop, press the PC button on the Elmo. The signal will then pass from the computer, through the Elmo to the projector.

How do I connect my Elmo document camera to my computer?

Making a Proper Connection

1. Plug in power cord of the Elmo.
2. Plug the power cable into the back of the Elmo device.
3. Insert the other end of the cable into the computer or laptop.
4. Turn on the projector.
5. Press the power button on the Elmo device and keep holding the button until a green warm light appears.

How do you focus Elmo?

Adjust Zoom – Zoom in or out using the black zoom knob on the left of the camera head. 4. Adjust Focus – Press the orange button labeled “AF” (auto focus) located in the center of the zoom knob. Make sure Elmo is on and that PC is chosen on the ELMO.

What is the Roland MX-1?

The Roland AIRA crew headed to Movement in Detroit – a city integral to the history of electronic music and to our history as a company. Armed with only a few sustained sounds from Ableton Live and a TR-8, KiNK shows how the MX-1 takes electronic music performance to the next level.

What is the MX-1 mix performer?

The MX-1 Mix Performer brings together your synths, drum machines, loops, DAW tracks, and more into a single performance-optimized mixing instrument. Combining elements of a mixer, control surface, audio interface, and step-based effector, the MX-1 is designed to be the nerve center of your electronic music rig.

How do I use Ableton Live with the MX-1?

Ableton Live Mode is available via the MX-1’s EXTERNAL MIXING MODE. In this mode, several aspects of Ableton Live can be controlled by the MX-1, including the ability to launch a clip or a scene, control over track settings and adjusting the send level.

How do I use the MX-1?

The MX-1 does something no other mixer can by controlling the tempo of all your sources from one piece of gear. Set it up by hand using the master tempo knob, match the beat of the band using the tap tempo button, or let the MX-1 do the work for you by automatically sensing the tempo being played from one of your sources.