How do I connect Catalyst 3560?

How do I connect Catalyst 3560?

Things you’ll need: Ethernet cable

1. Disconnect any cables connected to the switch.
2. Power the switch by connecting the AC power cord to the switch power connector and to a grounded AC outlet.
3. Wait for the “SYST LED” light on the front of the switch to turn solid green, which indicates that the POST is complete.

What does a Cisco Catalyst 3560 do?

The Catalyst 3560 is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video …

How do I configure a Cisco switch for home use?

How to Configure Cisco Switch: A Step-by-Step Guide with Commands

1. Connect the Switch to PuTTY.
2. Enter Privileged EXEC Mode and Set a Hostname for the Switch.
3. Assign a Password to the Switch.
4. Configure Telnet and Console Access Passwords.
5. Configure IP Addresses With Telnet Access.

What is a 3560 24ps?

The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office environments, combining both 10/100/1000 and PoE configurations for maximum productivity and investment protection while enabling the deployment of new applications such as IP telephony, wireless access, video …

Is Cisco 3560 a PoE?

The Cisco® Catalyst® 3560 Series is a line of fixed-configuration, enterprise-class switches that include IEEE 802.3af and Cisco prestandard Power over Ethernet (PoE) functionality in Fast Ethernet and Gigabit Ethernet configurations.

What is basic switch configuration?

Cisco Switch Configuration basic commands

• Changing the hostname of a switch to GfgSwitch :
• To add a banner message :
• To set IP address in Switch :
• To set the current clock time :
• Apply password protection (enable password, secret password, console password and vty password) :

How do I save a Cisco switch configuration?

Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it.