What is the value of an Atmos clock?
In terms of price, most Atmos clocks cost under 10,000 euros. However, some cost more, such as the Atmos Réédition. This clock, first produced in the 1930s, has a historic design with a large, round glass bell jar supported by a steel platform; it is available for 20,000 euros.
How do I fix my Atmos clock?
To restart an Atmos that has abruptly stopped – have the Pendulum in the UNLOCKED Position and slowly move the MINUTE HAND (only) around one complete turn clockwise; do not touch the hour hand. This should restart the Pendulum rotation again. Afterwards, Set the clock to the correct time using the minute hand only.
How do you set the Atmos clock?
To set your Atmos clock to the right time (including the summer/winter time change), move the minute hand forward with one finger. Note: never turn the minute hand anti-clockwise and never touch the hour hand. Make sure that the balance is locked before setting your clock.
Why does my Atmos clock keep stopping?
An Atmos keeping good time does not need any periodic maintenance. Once an Atmos clock starts stopping it generally means that it needs a Clean and an overhaul, very little amounts of dirt will bring your atmos clock to a stop.
Where are Atmos clocks made?
Switzerland
Atmos is the brand name of a mechanical torsion pendulum clock manufactured by Jaeger-LeCoultre in Switzerland which does not need to be wound manually. It gets the energy it needs to run from temperature and atmospheric pressure changes in the environment, and can run for years without human intervention.
How do I know what model my Atmos Clock is?
The Serial Number of an Atmos Clock is usually located on the top of the Movement, by the Speed Adjustment Lever. On some very older models, the serial number may actually be on the front of the Movement -near the hands and on Antique Reutter Clocks the serial number is often on the Back “Drum” portion.
Can Atmos clocks be repaired?
An ‘Overhaul’ on an Atmos Clock consists of an ultrasonic cleaning of the movement, all necessary repair and adjustments, plus recalibration (re-timing) the Movement. All Glass Panels are removed and cleaned while the clock is repaired.
How do I know what model my Atmos clock is?
How often should an Atmos clock be serviced?
every 20 years
The Manufacture recommends that Atmos Clocks be cleaned and repaired every 20 years or so, or as needed; some clocks can run much longer before needing service, depending on their environment.