What is HART Communicator 475?

What is HART Communicator 475?

Product Description. The 475 Field Communicator is designed to simplify your work in the field. It includes a larger touch screen than PDAs or Pocket PCs, supports HART versions 5, 6, and 7 (including WirelessHART) devices, and allows you to upgrade your 475 Field Communicator onsite using the Internet.

How do you charge a 475 Field Communicator?

Charging the battery Prior to first portable use, fully charge the battery. The battery can be charged separately or while attached to the 475 Field Communicator. The 475 Field Communicator is fully operable while the battery is recharging, and a full charge takes 2-3 hours.

How do you hook up a HART 475 transmitter?

Configure a Smart Transmitter

1. Connect power to your HART enabled Radar transmitter.
2. Power on the 475 Communicator by pressing and holding the power key until the green light on the power key blinks.
3. From the main menu tap the HART icon.

What is the difference between HART and 4 20mA?

The HART Protocol provides two simultaneous communication channels: the 4-20mA analog signal and a digital signal. The 4-20mA signal communicates the primary measured value (in the case of a field instrument) using the 4-20mA current loop – the fastest and most reliable industry standard.

How do I connect to my HART device?

HART Bluetooth(R) Since the new technologies allow to connect a HART device through Bluetooth with special HART modems. We also recommend you to use a windows or Android device to connect to your device and configure it avoiding a more complex installation with wires.

How do you calibrate a HART pressure transmitter?

Connect the pressure module cable to the 754 and connect the transmitter test hose from the hand pump to the transmitter. Press the HART button on the calibrator to see the configuration of the transmitter. Press HART again and the calibrator will offer the correct measure/source combination for the test.

What is the future of the Emerson 475 field communicator?

After October 2020, the 475 field communicator will be officially retired, meaning Technical Support and DD Updates will no longer be provided. For long-term support of your program or new handheld requirements, see Emerson’s next generation field communicator: AMS Trex Device Communicator.

What do you need to know about 475 Fiel ommunicator Marc?

475 Fiel ommunicatorMarc www.fieldcommunicator.com 2 The touch screen display and large physical navigation buttons provide for efficient use both on the bench and in the field. The icon-based user interface allows you to navigate quickly and efficiently. The full color graphics capability is provided as standard with every 475 Field Communicator.

What is the 475 field communicator protective rubber boot?

The 475 Field Communicator’s Protective Rubber Boot provides added protection in the field and in your toolbox. Both the rubber boot and 475 housing are designed in accordance with Intrinsic Safety standards to limit the build up of static electrical energy.

How much memory does the 475 field communicator have?

The 475 Field Communicator has plenty of memory to allow for future expansion. It has 32 MB of application memory and 1 GB of memory on its System Card. New HART and FoundationFieldbus devices, as well as functional updates to existing devices, are introduced continually by device vendors.