How do you fix a Maytag refrigerator that is not cooling?

How do you fix a Maytag refrigerator that is not cooling?

1. The Refrigerator isn’t cooling or is too warm

1. Adjust the temperature.
2. Check the settings.
3. Check if vents are obstructed.
4. Make sure the icemaker is turned on.
5. Check if the water line is kinked.
6. Make sure water shut-off valves are fully open.
7. Make sure the door is sealed properly.
8. Wipe down the door seal gasket.

Is there a reset button on my Maytag refrigerator?

There is no reset button on Maytag fridges. To reset any Maytag fridge model, you will need to use a combination of keys.

How do you put a Maytag refrigerator in diagnostic mode?

Enter the Service Test Mode by performing the following sequence of events.

1. Open the Fresh Food door and press and hold the Door Alarm keypad DoorAlarm .
2. Press and hold Refrigerator Temperature UP keypad .
3. Release the Door Alarm Keypad DoorAlarm and wait 3 seconds.
4. Press the Refrigerator UP Keypad again.

What is power cold on Maytag?

Maytag designed the PowerCold® feature that works quickly to restore optimal refrigerator temperatures. Its one-touch control design makes it easy to cool down quickly after loading groceries, cleaning shelves, browsing for items and storing leftovers.

Why is my general electric refrigerator not cooling?

If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back.

Why is my Refrigerator not working?

Fans not running will cause the fresh food and the freezer sections not to work. If the condenser fan (the one under refrigerator) is not working, the compressor will cut off on the overload. If the evaporator fan is not running, there will be no airflow to the freezer or the refrigerator.

Why does my refrigertor and freezer not getting cold?

Defrost system problems, dirty condenser coils, fan failures, leaky door gaskets or control problems can lead to your freezer not getting cold enough. Although you may see the cooling problem start in the freezer, you’ll typically soon find the refrigerator and freezer not cool enough. You’ll want to fix the problem quickly to avoid food spoilage.

Why is my Refrigerator not getting cold?

The control board regulates power to the compressor and evaporator fan based on the thermistor readings. If the thermistor is defective, the compressor and evaporator fan may not run when necessary. As a result, the refrigerator will not be cold enough.