How do you Derestrict a 50cc moped?

How do you Derestrict a 50cc moped?

How to Derestrict a 4-Stroke 50CC Scooter

1. Detach the kickstart from the variator system.
2. Open up the variator system.
3. Disengage the front pulley wheel from the pulley system.
4. Extricate the washer from its position around the front pulley rod.

How fast can a Derestricted 50cc scooter go?

Most 50cc scooters come with a restricted engine, which limits the bike to a top speed of 30mph (48kph). However, a 50cc scooter can go at speeds of up to 60mph (96kph), while most will comfortably reach 40mph (65kph).

How do you take the governor off a moped?

How to Remove a Scooter Governor

1. Remove the kick stand.
2. Unscrew and remove the two bolts holding the plastic cover of the intake box if your scooter has one.
3. Unscrew and remove the bolts of the variator case lid.
4. Crack the bolt holding the faceplate of the front pulley wheel with a socket wrench or an impact wrench.

Does Derestricting a moped damage it?

Derestriction cant directly harm the motor IMO. The motor would give the same power output at 100rpm in 4th on an incline as it would at 100rpm in 8th on a flat because they are limited to a certain power output.

How do you take the rev limiter off a scooter?

Extract the limiting washer from the variator system. The limiting washer is positioned around the front pulley wheel, and in most scooters it can be removed by hand or with a pair of needle-nose pliers. Reconnect the left pulley wheel and replace the variator case faceplate.

Are all 50cc scooters restricted?

As standard, 50cc mopeds have restricted engines. This means they have a lower top speed than what they’re engine is actually capable of reaching, but this is a legal requirement.

How fast does a Sym symply 50 go?

I’ve derestricted my sym symply 50 and it only goes around 34-40mph. How do I make it go faster is there a wire that u can snip or something.

How do I replace the Kickstart on my Sym moped?

Remove your Sym’s kickstart from the side of the moped’s variator case. Unscrew the bolt end of the pin that attaches the kickstart with a socket wrench and pull the pin out slightly. Pull the kickstart from the variator case. Detach the plastic intake case by unscrewing the three bolts that hold the case in place with the socket wrench.

How do I restrict the speed of my Sym?

The washer restricts your Sym’s speed by limiting contact between the variator belt and the front pulley. Remove your Sym’s kickstart from the side of the moped’s variator case. Unscrew the bolt end of the pin that attaches the kickstart with a socket wrench and pull the pin out slightly.

Can you drive a Sym moped over 30 mph?

In some states, mopeds and scooters that can travel over 30 MPH are actually considered small motorcycles, requiring their owners to get an M-class driver’s license. If derestricting your Sym moped allows it to travel over 30 MPH, you may need to re-register it with the DMV.