How to disassemble a 1911 completely?
Complete 1911 Disassembly If you want to take your 1911 completely to pieces, there are several further steps: Take out the firing pin and firing pin spring from the firing pin channel. Using your punch, start the taking the extractor out.
How do you remove the recoil spring from a 1911?
Hold the 1911 upside down to prevent the link, recoil spring, or recoil spring guide rod from interfering with your next step. Then, pull the frame off the slide. Set the frame aside; you’re finished with this part for now. Holding the slide, remove the recoil spring.
How do you reassemble a Kimber Aegis elite custom 1911?
Reassembly Steps of a 1911 5″ Government Pistol with Pictures Field Stripped 1911 Kimber Aegis Elite Custom Place the slide upside down on your bench and slide the barrel into the slide. Line up the barrel bushing as shown, press it into place firmly against the front of the slide.
How to perform a 1911 function and safety check?
Twist the Barrel Bushing Counter Clockwise To Hold the Recoil Plug in Place. Using Your Fingers, a Barrel Bushing Wrench or Real Avid Bench Block, press the Recoil Spring Plug Flush and move the Barrel bushing to the 6 o’clock position. The gun is now reassembled and ready to perform the 1911 Function and safety Check.
Is the 1911 A1 the only option?
Three war-production 1911A1 pistols. From left: Remington Rand (1944), Ithaca Gun Co. (1945) and Colt (1943). Everything has been said on it: that picking it up feels like shaking hands with an old friend, that it is old but reliable; according to Jeff Cooper, the guru of defensive shooting, the 1911 was the only possible option.
What are the mechanics of a 1911 handgun?
The mechanics of the 1911 handgun exhibits some critical points. The small tube that houses the manual safety and slide stop spring (called Plunger Tube) is mounted to the frame using two rivets that, over time and extensive use, tend to come loose.
Are there any problems with the 1911?
Often first time purchasers of 1911 system based handguns complain that their guns experience recurring malfunctions or failures. These can occur for a number of reasons, all solvable with some care by the experienced gunsmith or owner that knows how and where to work.
Why is the 1911 so easy to buy and maintain?
It’s certainly a more straightforward process than many more modern pistols, because the 1911 was designed as a military, open-carry handgun, and needed to be easy to maintain in the field. It was therefore designed as quite a simple device, with no parts that are over-complicated.
Do you need to clean your 1911 gun?
If you’ve been out in the rain with it, or if the pistol has been exposed to extremes of heat, humidity, or dust, it is likely to be dirty inside, and should be cleaned. Even regular use will necessitate you stripping and cleaning your 1911 gun.