What is the torque of 2 hp motor?

What is the torque of 2 hp motor?

Electric motor output power and torque vs. rotation speed.

Power	Motor Speed (rpm)
3450
1	0.75	2.1
1.5	1.1	3.1
2	1.5	4.1

How much torque should a 1 hp motor have?

The 1800 RPM, 1HP motor produces 3 ft. lbs of torque at 1800 RPM. The 3600 RPM, 1HP motor produces 1.5 ft. lbs.

How much torque does a hp motor have?

When you choose torque, this calculator will measure the approximate torque of an engine based on the horsepower, multiplied by 5,252 (conversion between foot-pounds and horsepower), divided by the RPM of the engine. For example, if your engine has 350 horsepower then the torque would be 367 foot-pounds, at 5,000 RPM.

How do you calculate motor torque?

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

What is the torque of 0.5 hp motor?

Standard Designs Of Torque Motors (Motors for winding) Available From Mark Elektriks

SR.NO.	KW/HP	LOCKED ROTOR TORQUE 415 VOLTS
3	0.37/0.5	0.25 KG-M
4	0.75/1.0	0.5 KG-M
5	0.75/1.0	0.9 KG-M
6	1.1/1.5	0.75 KG-M

What is the torque of a motor?

Torque: The torque output of a motor is the amount of rotational force that the motor develops. The torque of a small electric motor is commonly measured in either inch pounds (in-lbs), Newton meters (N-m) or other directly converted units of measure.

What is the rpm of 3hp motor?

Three Phase Foot Mounted Motor, Power: 3 hp, Speed: 3000 RPM

Brand	Sunride Electricals
Voltage	220-440V
Class	E
Frame Size	90L/100L
Full Load Rpm	3000 Rpm

How do I know how much torque I need?

Torque is defined the length of the lever arm multiplied by the force applied. For instance, if you have a two-foot long bar and you hang a 10-pound weight from it, you have 20 foot/pounds of torque.

What is torque of DC motor?

Armature Torque of DC Motor In a DC motor, a circumferential force (F) at a distance r which is the radius of the armature is acted on each conductor, tending to rotate the armature. The sum of the torques due to all the armature conductors is known as armature torque (τa).

How do you calculate torque?

Mathematically, torque can be written as T = F * r * sin(theta), and it has units of Newton-meters. When the sum of all torques acting on an object equals zero, it is in rotational equilibrium.

What is torque in AC motor?

Torque is the turning force through a radius – with the units Nm in the SI-system and the units lb ft in the imperial system. The torque developed by an asynchronous induction motor varies when the motor accelerates from zero to maximum operating speed.

How much power does a 3 HP motor use?

Rated Power: 3HP. Power Consumption: 2.2 unit per hr.

What is the torque of a 100 hp motor?

The torque delivered from an electrical motor producing 100 hp at speed 1000 rpm can be calculated as T = (100 hp) 63025 / (1000 rpm) = 6303 (lbf in) To convert to pound-force foot – divide the torque by 12.

How do you calculate horsepower from torque in rpm?

HP = T × S T Only after these three items have been determined is it = Torque in lb. ft. 5252 S = possible to calculate the required horsepower for the appliSpeed in RPM OR HP = T × S T = Torque in lb. in. 63,025 S = Speed in RPM OR HP = T × S T = Torque in in. ounces 1,000,000 S = Speed in RPM

What is an example of a variable torque motor?

For example, a two-speed 1800/900-rpm motor that develops 10 hp at 1800 rpm produces only 2.5 hp at 900 rpm. Variable-torque motors are often a good match for loads that have a torque requirement that varies as the square of the speed, such as blowers, fans, and centrifugal pumps.

How many amps does a 1 hp motor take?

Look at the table the 1 hp motor takes will be 1.3 A at 440 Volts three-phase at the same time while using single-phase it takes only 3.8 Amps. Also 5 HP three-phase motor takes 6.4 Amps.