What are drum sanders good for?

What are drum sanders good for?

Drum sanders are used for sanding larger pieces of wood perfectly flat. By using a fixed drum and conveyor system a drum sander can sand boards from 12″ long and any width perfectly flat. As a replacement for a belt sander, the drum sander will produce a higher quality finish.

Is a drum sander worth the money?

A stationary drum sander is a great tool for a smoothing everything from narrow strips to wide panels, while producing parts of consistent thickness. Better units, like the SuperMax 16-32 shown here (with its 16″-wide drum, and open-end design), may cost more than a sander with a drum housed on both ends.

Will a drum sander flatten a board?

The thing about these relatively small drum sanders is the infeed and outfeed rollers that hold the work down don’t really exert much pressure like a planer does, and therefore they don’t force the stock flat to the table.

How accurate is a drum sander?

Precision to 0.005 – drum sander’s the only way They come out precisely the same and the finished work looks so much better that way.

Can a drum sander replace a planer?

Drum sanders are great for fine surfacing or sanding wood, especially figured woods that tear out under planer blades, but it is not the best tool for removing large amounts of wood, such as you would do when leveling glued up boards or surfacing stock.” A drum sander is not made for the rigors of abrasive planing.

Can you make a drum sander?

Quick DIY Drum Sander This sander was built to sand corners or edges to fit square to the sides of another piece of wood. It is a single drum sander design and can work well on a bench drill or lathe. You would start by turning scrap wood into a drum. After this is done, get some glue and stick sandpaper unto the drum.

Can you plane a warped board?

In order to flatten a warped, twisted, or cupped board, a common approach is to first use a jointer to create one perfectly flat face. Then you run the board through a thickness planer with the flat face downward, and the planer makes the top face parallel to the bottom.

How much wood does a drum sander remove?

The drum sander you described will remove about 0.005″ to 0.007″ (five to seven thousandths of an inch) per pass. Even a small 12″ portable planer will remove 0.125″ to . 250″ (one hundred twenty five thousands, or one eighth of an inch to one quarter of an inch) per pass.