How do I fix my mouse Code 43?

How do I fix my mouse Code 43?

Uninstalling and then reinstalling the drivers for the device is a possible solution to a Code 43 error. If a USB device is generating the Code 43 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall.

How do I fix code 43 USB?

To fix this, unplug all of your USB devices, then turn off the PC and take out the battery (This is assuming that you’re on a laptop), let the PC set for about 5 minutes, then put the battery back in and restart the PC. Next, plug your USB devices back in one at a time and make sure that they work.

How do you recalibrate a wireless mouse?

To reset a wireless mouse:

1. Turn off your wireless mouse.
2. Hold down the left and right mouse buttons.
3. While holding down the mouse buttons, turn the mouse back on.
4. After around 5 seconds, release the buttons. You will see an LED flash if it resets successfully.

What is a code 43 on Windows?

Windows 10. This error occurs when your graphics device driver has notified Windows that the device isn’t working properly. This may mean that the device has a hardware problem, or that the driver or driver software is failing.

How do I fix an unknown USB device?

Resolution 4 – Reinstall USB controllers

1. Select Start, then type device manager in the Search box, and then select Device Manager.
2. Expand Universal Serial Bus controllers. Press and hold (or right-click) a device and select Uninstall.
3. Once complete, restart your computer. Your USB controllers will automatically install.

Why is my wireless mouse not working properly?

Fresh batteries are the cure for many wireless mouse problems. Verify it has been installed, to make your mouse ready to use. If the receiver is plugged in, and you’ve tried all other troubleshooting steps, try moving the receiver to a different USB port, if one is available. USB ports can go bad, making them unusable.

What is code 43 on a USB port?

Visually, USB code 43 looks like this: on the screen you see the message “Windows has stopped this device because it has reported problems (code 43).” This indicates that the device manager has stopped USB operations due to a device malfunction. Unfortunately, as a result of this error, you cannot access the data.