How do I connect my Ingenico ICT250 to the Internet?

How do I connect my Ingenico ICT250 to the Internet?

Connect one end of the included Ethernet cable to the port on the Magic Box labeled ETH. Then plug the other end of the cord into an open Ethernet port on your router. Connect the round power adapter to the Magic Box and plug into wall outlet. Connect the other end of the cable to any open Ethernet port on your router.

How do I disable Nets terminal?

Hold down the clear button and the punctuation button (below the 9 key) at the same time for 3-5 seconds, until the terminal turns off.

Is Ingenico ICT250 contactless?

Offering EMV chip & PIN, magstripe, and NFC/contactless payment, the iCT 250 also enables new NFC couponing and wallet applications. Equipped with an unparalleled array of communication technologies such as high speed modem or Ethernet, the iCT 250 delivers anytime, anywhere connectivity.

How do I reset my Ingenico ICT250?

To REBOOT, hold down both the [FUNC] and [CLEAR] keys on the terminal at the same time. To POWER OFF, unplug the terminal’s external power cable. Note: The first three yellow option buttons will be used as the Cheque, Savings and Credit keys. The fourth soft key will not be used.

How do I connect Ingenico to my computer?

Connect hardware

1. Plug the connection cable’s flat end into the payment terminal and secure it with the included screws.
2. Plug the power supply into the connection cable’s round end.
3. Plug the connection cable’s USB end into the back of the computer.
4. Plug the power supply into an electrical outlet.

What does nets charge per transaction?

A transaction fee of 1.8% will apply for each MyDebit transaction. For new merchants, this transaction fee is in addition to initial terminal set up charges and monthly fees relating to terminal subscription/NETS transactions.

What size paper does Ingenico iCT250 use?

57mm x 40mm Ingenico ICT 250 Tally Rolls.