What is the default password for Konica Minolta?

What is the default password for Konica Minolta?

12345678
Article sections

Product	Version	Default Password
bizhub C20		administrator
bizhub c203	all	12345678
bizhub C220		12345678
Bizhub C224e	all	1234567812345678

How do I put my Konica into service mode?

Service mode use restriction by administrator

1. Press Utility/Counter on the control panel to display [UTILITY], then press [Administrator Setting] to display the [Administrator Setting Menu] screen.
2. On the [Administrator Setting Menu] screen, press [Security Setting], and then press [Service Login Allow Setting].

How do I reset my Konica Minolta printer from web interface?

Reset the controller of this machine and restart the network interface. In the administrator mode, select [Maintenance] – [Reset] – [Reset], then click [Reset].

How do I reset my Konica Minolta printer?

Click [Initialize] – [Reset] on the menu of [Maintenance] tab to display this screen. Reset the controller of the machine, and restart the network interface. Click [Reset], then [OK]. After the reset process is completed, you must close the browser once, then open and access it again.

How do I connect my Konica Minolta printer to the Internet?

Connect your computer to the wireless network where your printer is connected

1. Click.
2. Click Connect to a network, and then select an SSID.
3. Type the WEP key or WPA/WPA2 preshared key/passphrase of the access point in the “Security key or passphrase” or “Security key” text box.
4. Click Connect or OK.

How do I access PageScope Internet connection?

To access PageScope Web Connection, launch the Web browser. PageScope Web Connection has two view modes: Flash and HTML. For details, refer to Login….For details, refer to Login.

1. Start the Web browser.
2. Select [Administrator] from the Login options on the top screen, and click [Login].
3. Enter the administrator password.

Where is the sub power switch Konica Minolta?

Turn on the Sub power switch on the right side of the machine. The Power LED on the Control panel lights up blue. The wake-up and warm-up screens is displayed.

How do I clear the memory on my Konica Minolta bizhub?

Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Restrict User Access], [Lock/Delete Mode Memory], and [Scan Mode Memory] in sequence.

Where is WPS pin on Konica Minolta?

If you press the WPS setting button at the access point, settings such as SSID and security required for a connection are configured automatically. [PIN Method]: Select [PIN Method], and tap [Start Operation] to display the PIN code.

How do you power cycle a Konica Minolta printer?

Resolution

1. Pull down the door on the front of the machine, above the paper trays.
2. Locate the switch on the bottom left.
3. Flip the switch to the off position and wait 30 seconds.
4. Flip the switch to the on position and wait for the machine to boot up.