Is NEC projector good?

Is NEC projector good?

The NEC Display Solutions NP-ME401W is a highly capable LCD-based data projector, with high brightness, very good data and video image quality, and a solid set of connection choices.

Why is my NEC projector image upside down?

Hold down the A/V Mute button on the remote control for five seconds. The image disappears briefly and reappears flipped top-to-bottom. On the remote control select Menu -> Extended and press Enter. Use the up/down arrows to get to Projection and change it to Front/Ceiling.

How do you flip the screen on a NEC projector?

How do I flip or invert the projected image after mounting the unit on the ceiling or wall mount?

1. In the projectors on screen menu select the Setup option.
2. Under setup go to Installation or Installation 1 in the sub menu.
3. Within installation you will need to select Orientation.

Why is my NEC projector blurry?

If the projected image is fuzzy or blurry, try the following solutions: Position the projector so the keystone adjustment angle is not so wide that it distorts the image. Turn on automatic keystone adjustment in the projector’s menus. Adjust the Sharpness setting to improve image quality.

How do I reset my NEC projector?

Switch on the projector. On the remote control hold down the “ARROW RIGHT”, “ARROW LEFT” buttons on the remote control and at the same time hold the “POWER” button down on the projector control panel. Wait around 3 seconds, the lamp indicator will flash twice. Release the buttons to complete the lamp reset.

When did NEC stop making LCD projectors?

From NEC — Discontinued June 2011 High brightness, multi function LCD projector with LAN support provides effective, impressive presentations for conferences and educational seminars. diagonal screen, place the projector lens between 9′-10″ and 11′-9″ from the screen.

What is the ANSI lumen rating for projectors?

The ANSI lumen rating measures the brightest white that a projector can produce by averaging nine light meter measurements taken across the projected image.

How do I connect my projector to my computer via LAN?

Connect a LAN cable to the LAN port (RJ-45) on the main unit of the projector to control the projector from a remote PC via the network; for instance, use the PC to turn the power to the projector on and off or switch input signals.