How do you dilute procion dye?

How do you dilute procion dye?

Dilute the remaining half of the mixed-up dye by adding an equal volume of water (or urea water, or whatever liquid you’re using), mix it together, then put half of the resulting quantity into container two.

How are procion dyes made?

The chemical used to make the dyes react is soda ash; this is found in laundry detergents and swimming pools and is used in such small amounts that it makes a minimal impact. Salt is also used, but when combined with the rinse water and diluted in the water system, it isn’t a problem.

How long do procion dyes last?

The big dye retailers suggest that their Procion MX dye powders will stay good for one to two years after purchase. However, dyes found in a less-well-run crafts store might, in some cases, be a couple of years old already, before purchase.

Which is the another name of procion M brand dyes?

Dichlorotriazine: Procion MX, Lamafix, Adiactive, Duractive Kiractive, Tulactiv, “Cold Brands”, “Cold Brand”, etc. Dichlorotriazine dyes were patented in 1954 by the ICI corporation (Rattee, I. D. and W. E. Stephen, German Patent No.

What is a substitute for soda ash?

If soda ash is unavailable, you can use baking soda to create a fixer solution, but you need to adjust the soda/water ratio and add heat to achieve the same results.

What is Synthrapol detergent?

Synthrapol® is an industrial strength, pH neutral, liquid detergent used as a prewash and afterwash for dyed or painted fabrics and as a wetting agent for fabric dyes and paints.

Do you add salt to procion dye?

In tie-dyeing cotton, rayon, and silk, using fiber reactive dyes such as Procion MX or Sabracron F, there is no need to use salt at all.

How do you stop tie dye from bleeding?

Try soaking your tie dye in equal parts white vinegar and cold water for 30 minutes after you initially rinse out the dye from your garment. The vinegar helps with colorfastness. After the first couple washes, wash tie dye in cold water to prevent dye from fading.

Does vinegar set procion dye?

Vinegar will do nothing to set tie-dye on cotton! The best dyes to use for tie-dye are the fiber reactive dyes, such as Procion MX dyes. These dyes are set at a high pH, by pre-soaking in soda ash mixed with water. Vinegar has a low pH and will neutralize the soda ash, preventing the dye from setting.

How long does procion dye last after mixed?

As a general rule, you can store Procion MX dye mixtures at room temperature for a week or two without problems, as long as not even a tiny drop of soda ash has gotten into any of them.

Can you use procion dye without soda ash?

However, if almost all of the dye is washing out, you have a real problem. Maybe you left out the soda ash step. A friend of mine did that once, dyeing cotton with Procion MX dyes without any soda ash at all. You can use anywhere from one-third to one cup of soda ash per gallon of water.

Is Borax the same as soda ash?

Washing soda or soda ash is the common name for sodium carbonate, this naturally occurring mineral carries the formula Na2CO3. Borax on the other hand has a slightly different chemical composition of sodium tetraborate or Na2B4O7.