How do I know if my PetSafe transmitter is working?

How do I know if my PetSafe transmitter is working?

1. Using the Test Light, with the Static Correction Level set at 2 or greater, hold the Receiver Collar at your pet’s neck height with logo side facing away from the Transmitter. 2. Walk towards the Boundary Zone until the Receiver Collar beeps and the Test Light flashes.

Why is my PetSafe transmitter beeping?

If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it’s possible your backup battery unit needs to be replaced.

How does PetSafe wireless pet containment system work?

The system works by transmitting a radio signal up to 90 feet in all directions. You temporarily define the Pet Area with Boundary Flags for a visual aid in training your pet. Your pet wears a Receiver Collar with Contact Points that touch his neck, and, once trained, is allowed to roam freely in the Pet Area.

Why is my PetSafe collar beeping but not shocking?

Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.

Why is my electric dog fence not working?

Check to make sure the collar battery is inserted positive end facing upward. Try resetting the frequency of your dog fence collars, to a setting of 01 on your transmitter. Try testing the collar by holding it at the height of your dog’s neck, which is around your knees.

How do you test an invisible fence transmitter?

Some invisible pet fences include a battery tester with the fence system. Place this on the collar and walk past the boundary wire. If the tester lights up and you hear the audible warning given by the collar, the battery is functioning properly. If you hear the warning, but no light flashes, replace the battery.