Can you cut existing granite for new sink?

Can you cut existing granite for new sink?

After many years in the countertop industry, we’ve come across many homeowners asking if their granite countertop can be cut or modified to fit their new cooktop, fridge or new sink. Surprisingly, the answer is yes, this can be achieved, with the help from SurfaceLink of course!

Can I cut a granite countertop yourself?

Granite is a hard rock that’s tough to cut through, but you don’t need to be a stonemason to cut it yourself. With a circular saw and a diamond-cut blade, you can make clean and precise cuts. As long as you take the right precautions, you can turn cutting granite into a safe and enjoyable DIY project.

How much does it cost to cut granite for sink?

How much does it cost to cut granite? Although it can cost $300 to $500 to cut this stone, installers include granite fabrication services in their labor rate. They will trim it to size, round or bevel the edges, and cut out the sink, for example, during the install.

Can existing granite be cut for farmhouse sink?

Can You Add a Farmhouse Sink in Existing Granite? But, if it’s only the new farmhouse sink in existing granite, a few cuts will get the job done. The cutting can be accomplished, once measured, with a circular saw, a cement saw, or a tile saw.

How much is raw granite worth?

Slab granite will range from $20 – $50 per square foot, while tile granite will cost $10 – $30 per square foot. Of course, you’ll want to get a least one estimate done to help narrow down pricing. An expert will be able to advise on the type of granite that is most suitable for your countertop.

Will a masonry bit drill through granite?

You will need to ensure that you have fitted your drill with a core drill bit. Do not attempt to drill through granite using a masonry bit, as it will not be strong enough to get through the stone. To prevent the oil from soaking into the granite, you should wash it straight after you have finished drilling.