How thick is Polyiso 30?
0.5” to 4.5”
Polyiso roof insulation is typically manufactured in incremental thicknesses from 0.5” to 4.5” with versatile options for meeting energy code requirements.
What is tapered insulation board?
Tapered SecurShield is a rigid roof insulation panel composed of a closed cell polyisocyanurate foam core laminated on-line to a premium performance coated glass facer. Features and Benefits. » Premium facer improves fire resistance, moisture resistance and. dimensional stability.
What is ISO board used for?
Polyiso, or polyisocyanurate, is a rigid foam insulation used in more than 70% of commercial roof construction and offers a continuous insulation solution for commercial flat (low slope) roof insulation and wall assemblies.
What is the R value of ISO board?
For the R-value of polyiso wall insulation, a full thickness, 180 day aged value is recommended. Foilfaced polyiso has an R-value of about 6.5 per inch and permeability faced polyiso wall insulation has an R-value of around 6.0 per inch.
What is a good R-value for walls?
Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. See the Department of Energy’s (DOE) ranges for recommended levels of insulation below.
What is Q Panel Paint test panel?
Q-Panel Paint Test Panels Q-Panel brand test panels minimize metal variability in coatings tests. Panels are available in various sizes and finishes, including bare steel, iron phosphated steel, bare aluminum and chromated aluminum. Panels are supplied pre-cleaned, with a 1/4″ (6mm) Q-shaped hole.
What are standard Q-panel test substrates?
Q-PANEL standard test substrates from Q-Lab are available in a variety of sizes and finishes, fabricated from steel and aluminum. Use our Q-PANEL Selector guide to browse our extensive list of standard panels and request a quote, or see a partial list below:
How thick is a QD panel?
Type QD panels have a smooth, bright finish and are 0.020″ (0.51 mm) thick. As our smoothest panel, Type QD is recommended for testing gloss and color. These panels are the best buy for many general applications, but are not recommended for physical properties and corrosion tests.
What is the size of the Q Hole on the panels?
Panels are supplied pre-cleaned, with a 6mm (¼”) Q-shaped hole (it’s our trademark and your assurance of quality). For safety and ease of handling, the panels have rounded corners and deburred edges.