How do I setup my foscam camera?

How do I setup my foscam camera?

Option 1: setup via the Foscam app

1. Connect your smartphone or tablet to your router’s network.
2. Download the Foscam app in the App Store or via Google Play.
3. Start the application.
4. Create an account via the app.
5. Scan the QR code on the camera. The app will than find the camera’s information.
6. Follow the steps in the app.

How do I connect my foscam to WiFi?

How to connect a Foscam HD Camera to a wireless router?

1. Step 1: Login the camera from Foscam VMS or web browser.
2. Step 2: Go to Settings–> Network–> WiFi to configure the wireless connection.

How do I reset my foscam fi9821w v2?

Figure 1.3 Reset button: Press and hold down the RESET BUTTON for 5 seconds. Wait for 20 seconds after released, the IP camera will reboot and it will be reset back to factory default settings. You must power on the camera before reset.

Why is my foscam not connecting?

Disable the router’s firewall or change the blocking rules. Check if your Internet link has enough bandwidth. Log in to the device and check the port number it’s using. Log in to the Foscam App and check if the configuration is correct.

How do I find the IP address of my foscam camera?

To find out the IP address of the Foscam camera follow the steps below.

1. Connect the camera via an Ethernet cable to a LAN port on the router.
2. Power on the Foscam camera.
3. Verify the computer is connected to the same router.
4. Standby until the camera completes the self-test.

How do I install a Foscam plugin?

Windows OS Download the plugin file; after the download is complete locate the file. Right click the downloaded file and choose the option from the menu that appears “Run as administrator.” Follow the on-screen instructions to complete the installation of the software.

Where is the reset button on my Foscam?

On a Foscam outdoor camera, the reset button isn’t located on the IP camera itself, but on the bundle of connectors. There’s a black connector with a small white button on the tip. This is the reset button. Press the reset button and hold it for 10 seconds.

How do you reset a Foscam?

To reset a camera, locate the reset button and press it for approximately 30 seconds. At the end of that time the camera will reboot itself and the factory settings will be restored. Some models require only a 10-15 second timeframe.

How do I find my Foscam IP address?

What port does Foscam use?

On HD Foscam Camera’s the default HTTP port number is 88.

What are the features of the Foscam fi9821w V2 megapixel wireless IP camera?

The Foscam FI9821W V2 Megapixel Wireless IP Camera features high definition 1280 x 720p video resolution, h.264 video compression, built-in DVR via SD card (upto 32gb), two-way audio, wifi-N capability, pan/tilt, remote internet viewing, motion detection, night-vision as well as network video recording…

How do I change the port on my fi9821w camera?

Login to the camera; then click on Settings at the top, then click Network on the left side. Next, click the Port section. Page 13 FI9821W Quick Installation Guide 5.1 Static IP Addresses Users who have static IP addresses do not need to set DDNS service settings for remote access.

How do I install fi9821w on my Mac?

Software Installation Insert the CD into the CD drive of your Mac and find the folder“FI9821W”, then go to the folder “For MAC OS”. Copy the IP camera tool to your MAC and start the program. Page 19 FI9821W Quick Installation Guide 3.

What is the warranty on my Foscam wireless camera?

Foscam.us does not provide support or warranties on behalf of any Foscam cameras purchased directly from China and sold on Amazon, Ebay, or other through other resellers. We guarantee that your Foscam wireless camera will be 100% functional or we will issue you an immediate replacement.