How do I fix my Acer Aspire black screen?

How do I fix my Acer Aspire black screen?

Fix 1: Power reset your laptop

1. Turn off your laptop.
2. Remove the AC adapter cable, hard drives, the battery and any other attached peripheral devices.
3. Press and hold the Power button for 30 seconds and release.
4. Put your battery back in and plug the charger.
5. Press the Power button as normal to turn on your laptop.

Why does my Acer monitor go black?

If the cable run is too long, or of the signal has been split (using a non-powered DVI or HDMI splitter), this can cause the monitor to go black because the signal isn’t strong enough. Assuming that the cables are plugged in securely, power on the monitor and check to see if the monitor keeps going black.

What do you do when your laptop is on but the screen is black?

One of the main causes for this issue is a corrupt system file preventing the operating system from loading, resulting in the black or blank screen. Restart Windows to see if it’s a temporary issue and resolves itself with a reboot. If the problem persists, erase your hard drive and reinstall Windows.

How do you fix a black screen on a monitor?

Before you begin troubleshooting a blank monitor

1. Make sure the monitor has power and the power light comes on when the power button is pressed.
2. If you have a flat panel LCD monitor, unplug the monitor power cable, wait about 30 seconds, reconnect the cable and then turn on the monitor.

Why my monitor suddenly went black?

Bad PSU: The Power Supply Unit is known to be the most common culprit of making your monitor go black. Video cable: The video cable whether is an HDMI or VGA connecting the monitor to your PC might be broken or damaged. This will usually cause a black screen when it is touched or randomly as well.

How do I fix my computer when the screen is black?

How To Fix a Black Desktop Screen On Windows 10

1. Check for any loose connections.
2. Force the display to wake up.
3. Try a different monitor to check for a faulty video card.
4. Examine your computer’s motherboard for damage.
5. Repair or replace the monitor.
6. Boot into Safe Mode.
7. Reinstall Display Driver.

How to fix ACER laptop black screen after logo?

Fix 4: Reinstall the Graphics Card Driver. Sometimes, even a driver-related issue can also cause the Acer computer black screen problem. For instance, if the driver has become corrupt, is outdated, or has not been installed properly, then it can make your Acer laptop go black screen after the logo. To fix it, you can consider reinstalling

How to fix ACER laptop won’t turn on?

If there is a minor issue with its firmware or booting, then you can try to power reset your laptop. To do this, just press the Power button on your laptop and keep holding it for at least 15 seconds. This will forcefully perform a soft reset on your Acer system and would turn it off.

How to fix black screen on Windows 10?

By the way, you can learn more fixes on Windows 10 black screen. If the memory module is loose, it usually causes the laptop to not display images. Therefore, reinstalling the memory module may solve the problem of black screen or black screen on the laptop.

How do I reset my Acer laptop to factory settings?

To do this, just press the Power button on your laptop and keep holding it for at least 15 seconds. This will forcefully perform a soft reset on your Acer system and would turn it off. Afterward, let go of the Power button, wait for a while, and press the Power key again to turn it on.