What are the steps need to perform to configure SnapMirror?

What are the steps need to perform to configure SnapMirror?

1. Verify the cluster peer relationship and SVM peer relationship.
2. Create the SnapMirror relationship (starting with ONTAP 9.3)
3. Create the SnapMirror relationship (ONTAP 9.2 or earlier)
4. Set up the destination SVM for data access.
5. Monitor the status of SnapMirror data transfers.

How do you break the SnapMirror relationship in NetApp 7 mode?

Use the snapmirror delete command to delete the SnapMirror relationship between the 7-Mode volume and the clustered Data ONTAP volume. Use the snapmirror release command to remove the SnapMirror relationship information from the 7-Mode system.

What is SnapMirror in NetApp cluster mode?

SnapMirror is a feature of Data ONTAP that enables you to replicate data. SnapMirror enables you to replicate data from specified source volumes or qtrees to specified destination volumes or qtrees, respectively. You can provide users immediate access to mirrored data in case the source goes down.

How do I turn off SnapMirror on NetApp?

From either the source or the destination system, enter the following command: snapmirror abort [-h] {[ dest_system :] dest_volume | [ dest_system :] /vol/volume_name/qtree_name …} -h specifies a hard abort; the transfer cannot be restarted. SnapMirror stops the transfer and clears the restartable transfer log.

How do I initialize SnapMirror?

Steps

1. If the destination is a volume, is online, and has not been initialized before, enter the following command from the destination system: vol restrict dest_volume.
2. From the destination system, enter the following command: snapmirror initialize [ options ] [ dest_system :] { dest_volume | qtree_path }

How do you set up SnapMirror?

Snapmirror Setup NetApp Cluster Mode Verify the status of peer should be in Ok and available. Select appropriate options Source Cluster name > Source SVM > Source Volume and Destination SVM and Volume. Click on Create. You can also assign Mirror schedule by clicking on drop down and select one Or create new schedule.

How do you break a SnapMirror relationship in netapp?

Select the SnapMirror relationship that you want to break and verify that the Transfer Status column displays either Idle or Quiesced. If the relationship needs to be quiesced, click Operations > Quiesce. Click Operations > Break . Select the confirmation check box, and then click Break.

How do I check my SnapMirror relationship on Netapp?

Select SnapMirror relationships that have a matching last transfer source. Select SnapMirror relationships that have a matching last transfer end timestamp. Select SnapMirror relationships that have a matching unhealthy reason. Select SnapMirror relationships that have a matching progress last updated.

How do I check my SnapMirror relationship on NetApp?

How do I pause SnapMirror transfer?

Suspending SnapMirror transfers

1. Log in to System Manager from the destination system. Connecting to OnCommand System Manager.
2. Select the Storage Virtual Machine (SVM) and click Protection.
3. Select the relationship and click Operations > Quiesce.

What is SnapMirror resync in NetApp?

Description. The snapmirror resync command establishes or reestablishes a mirroring relationship between a source and a destination endpoint. The endpoints can be Vservers, volumes or non-Data ONTAP endpoints that support SnapMirror.

How do you get a SnapMirror relationship?

Snapmirror Setup NetApp Cluster Mode One way it will create peer relation and other side it will accept invitation from other cluster. Verify the status of peer should be in Ok and available. Select appropriate options Source Cluster name > Source SVM > Source Volume and Destination SVM and Volume. Click on Create.

How do I create a qtree in SnapMirror?

If the destination volume or qtree specified is not in a scheduled relationship, then the -S option must be used to provide a source. The snapmirror initialize command creates the destination qtree, but you must specify the destination qtree name at the end of the path as though it already existed.

How do I use SnapMirror?

You can use SnapMirror commands to perform different SnapMirror operations for a volume, qtree, or system. The following table lists the commands for using SnapMirror, along with their corresponding operations: Enable SnapMirror on the system, in order to enable the system to work as both a source and a destination for SnapMirror transfers.

How do I resynchronize the SnapMirror relationship?

Reestablish the SnapMirror relationship between the source and a former destination volume or qtree. Use this command after the snapmirror break command to resynchronize the contents of the source and destination volumes or qtrees, without repeating the initial transfer.

What is releaserelease SnapMirror snapshot?

Release SnapMirror Snapshot copies on former source volumes or qtrees so that the Snapshot copies can be deleted. Turn off SnapMirror functionality for a specified system.