What does GFCI outlet mean?
ground-fault circuit interrupter
The ground-fault circuit interrupter, or GFCI, is a fast-acting circuit breaker designed to shut off electric power in the event of a ground-fault within as little as 1/40 of a second. The GFCI is rated to trip quickly enough to prevent an electrical incident.
What is the difference between a GFCI outlet and a regular outlet?
You can tell standard and GFCI outlets apart simply by looking at them, as their appearance differs. Standard outlets are smaller in size versus GFCI outlets. Standard outlets do not have testing buttons on the outlet face as GFCI outlets do.
Why do you need a GFCI outlet?
GFCIs are designed to prevent electrocution, so they are essential for a family’s safety. In most cases, multiple bathroom receptacles throughout a home can be protected by one GFCI outlet. Similarly, only one GFCI is generally needed to protect all kitchen counter outlets.
What is a GFCI outlet and where is one needed?
GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
Where are GFCI outlets used?
The NEC requires GFCIs on all exterior and bathroom receptacles (another term for outlets). GFCIs are also required on all receptacles serving kitchen countertops. In laundry rooms and utility rooms, GFCIs should be installed on outlets within six feet of sinks, washing machines, and water heaters.
Are GFCI outlets different?
Three types of GFCIs are commonly used in homes – the GFCI outlet, the GFI circuit breaker and the portable GFCI. All of these GFCIs perform the same function but each has different applications and limitations.
Can you replace a GFCI outlet yourself?
After you have removed the old outlet, you can begin replacing it with the new GFCI outlet. Using your needle nosed pliers or wire cutter, make sure the wires are straight and able to be put into the new GFCI outlet. You only want to be rewiring your GFCI outlet into the line screws.
Can you replace a regular outlet with a GFCI outlet?
You can replace almost any electrical outlet with a GFCI outlet. Correctly wired GFCIs will also protect other outlets on the same circuit. While it’s common to find GFCI outlets in bathrooms and kitchens, there are GFCI outlet requirements.
Can I install a GFCI outlet myself?
After you have removed the old outlet, you can begin replacing it with the new GFCI outlet. Using your needle nosed pliers or wire cutter, make sure the wires are straight and able to be put into the new GFCI outlet. As you begin, turn the outlet over. You only want to be rewiring your GFCI outlet into the line screws.
Does a refrigerator need a GFCI?
A refrigerator shouldn’t be plugged into a GFCI outlet. GFCI outlets are used in areas of the home with water or moisture. These include bathrooms, basements, and kitchens.
How do I know if my outlet is GFCI?
A GFCI receptacle is easily recognizable. Simply look for the test and reset button on the face of the outlet. When installed, any electrical device that is plugged in will be protected in the case of a ground fault. This also includes any electrical outlets that are connected on the same line.
How much does an electrician charge to install a GFCI outlet?
The average cost to install a GFCI outlet is $220 per outlet when you hire a licensed electrician. This cost includes the outlet and labor expenses. The cost to hire an electrician is $80 to $150 per hour for one GFCI outlet, with a minimum charge of one hour.
What is GFCI outlet is and what does it do?
A GFCI outlet contains a sensor that monitors the flow of the electrical current through the wires , and when it senses a ground fault (in electrical terms, “fault” means any variation from the normal current), the GFCI, which also contains an internal switch, shuts off the flow of electricity in the outlet.
What does GFCI stand for in outlet?
GFCI Outlets. GFCI stands for ground-fault circuit interrupter and is a type of outlet used to provide protection against accidental electrocution.
GFCI outlets must be installed in any area where electricity and water may come into contact, including basements, pools, spas, utility rooms, attached garages and outdoors. At least one GFCI outlet is required in an unfinished basement and for most outdoor outlets.
What is the purpose of a GFCI outlet?
The purpose of a GFCI outlet is to trip the electrical circuit when it detects ground faults or current leakage. In other words, the outlet instantly shuts off when exposed to water, thus preventing potentially deadly electric shock.