How much does it cost to carpet a set of stairs?
Carpeting on stairs is usually priced differently because of the specialized skill needed and additional tools. On average, you can expect to pay between $150 and $600 to carpet stairs, including new carpet for the landing. Some contractors will charge per step, and that ranges from $10 to $45 per step.
How do you calculate carpet for stairs?
Stand on the top step and mark on your plan where the landing meets the stairs. Measure the width and the length of this area; (including the height and width of the top step) and multiply measurements to calculate how much carpet you’ll need.
How many square feet of carpet do I need for 12 stairs?
54 square feet
For a typical set of 12 box stairs, you’ll multiply the 36” width by the 18” tread and riser, then multiply by 12 stairs. The total is 7776 square inches of carpet, which equates to 54 square feet.
How many square feet of carpet do I need for 13 stairs?
How much carpeting for 13 stairs? You’ll need between 80 and 110 square feet for 13 stairs.
Do stairs count as square footage?
Stairs: Runs/treads and landings both count in square footage totals. They are measured as a part of the floor “from which they descend,” so are generally counted twice in a typical two-story home with a basement.
How do you calculate square footage of stairs?
The area is measured by multiplying the length times the width together. To measure the square footage of your stairs, measure how deep each step is and how wide each step is. Multiply those together to get the area of one step, then multiply that by the number of steps you have to get the total.
How much does 13 steps of carpet cost?
How do I calculate stairs?
You divide the height by 7 inches; if, say, the floor-to-floor distance is 8 feet, 10 inches (or 106 inches), then you’ll need 15 treads (106 divided by 7 equals 15.14). Next, you divide the height by the number of treads (15 into 106), producing the exact tread height (7.06 inches).
Round the height measurement to the nearest foot (meter), and record it. Multiply the measurements to determine the square footage, or area, of one step. Add 3 inches (7.62 cm) if you plan to use carpet padding on the stairs. Count the stairs and record that number.
How to measure stairs for carpet?
Measure the Run. Start by measuring the run of the top step.
How do you calculate carpet?
Here’s a simple formula for calculating your carpeting needs and cost: Multiply the length and width (in feet) of each room to be carpeted. Next you will want to calculate your overage so multiply the total by 1.1 to make sure you don’t run short. Divide the total by 9 to get square yards.
How to calculate carpet area?
Draw a diagram of the room you want to carpet.