How do I get my Balboa hot tub out of SL mode?
TO EXIT REST MODE:- Press Temp, then press light repeatedly until ‘MODE’ appears in the LCD. Toggle between READY and REST by pressing temp. Press light or wait for 10 seconds to go back to the Main Screen.
What does SL mean on Balboa hot tub?
Sleep Heating Mode
Balboa topside displaying SL or SLP. If the “SLP” or “SL” Message is Alternating with the Water Temperature on the Topside Display, the Spa is Operating in the “Sleep Heating Mode”. This is NOT an error message. Note that a Sleep Heating Mode will drop the water temperature 20 degrees below the set temperature.
What does SL mean on a hot tub display?
SL: Sleep – Sleep mode will only allow the spa to heat within 20 degrees of the set temperature.
Why is my hot tub flashing SL?
If the SLP or SL Message is Alternating with the Water Temperature on the Display, the Spa is Operating in the Sleep Heating Mode.
How do I unlock Balboa hot tub?
Spas using Balboa control systems To unlock the panel, while holding down the “Temperature” button (or the “Up” button if you do not have the “Temperature” button), gently press and release the “Light” button twice.
How do you change the mode on a Balboa hot tub?
Depending on system configuration, mode changing may not be available and will be locked in Standard Mode. Mode is changed by pressing “Temp,” then “Light”. Standard Mode maintains set temperature. will be displayed momentarily when you switch into Standard Mode.
What does SL mean on a strong spa?
SLEEP
SLEEP – SL, SLP Sleep is considered a vacation heater setting, and will maintain your spa water at the most affordable price. Spa will only heat during your filter period. The water temperature may drop up to 20 degrees below your desired temperature.
What mode should hot tub be on?
We reccommend setting your spa to “Auto” so that the water is always warm and ready for you to use. If you ever notice that your hot tub water temperature has dropped, but there are no error messages displayed on your control panel, you should check that the spa is set to “Auto” mode.
How do you reset the Balboa control panel?
Remove the spa cover and allow water to cool. At 107¡F (approximately 41.7¡C), the spa should automatically reset. If spa does not reset, shut off the power to the spa. Standby Mode has been activated by pressing a button combination on the user panel.
How do you unlock a Balboa TP600?
Unlocking the Balboa TP600 Topside (Standard Mode) Print While pressing and holding the UP Temperature button, slowly press and release the Lights button TWO (2) times. If you require any further assistance, please contact Customer Service.
What are the side error codes for Balboa spa?
Balboa Spa Side Error Codes pd Power supply, unit running on battery ba OH Sensors reading 112-118° F. OHH Overheat. Spa has shut down. One sensor OHS Overheat. Spa has shut down. One sensor
What does slslp mean on a hot tub?
SLP or SL Message. If the SLP or SL Message is Alternating with the Water Temperature on the Display, the Spa is Operating in the Sleep Heating Mode. If the SLP or SL Message is ON Solid (Not Flashing) on the Display, the Spa is Operating in the Sleep Heating Mode, but there is No current water temperature because the Spa is between Filter Cycles.
What does the SLP or SL message mean on the display?
If the SLP or SL Message is Alternating with the Water Temperature on the Display, the Spa is Operating in the Sleep Heating Mode. If the SLP or SL Message is ON Solid (Not Flashing) on the Display, the Spa is Operating in the Sleep Heating Mode, but there is No current water temperature because the Spa is between Filter Cycles.
How to get a hot tub to exit SL sleep mode?
How to get a hot tub to exit SL sleep mode? I have seen this happen with Cal Spas. On them you need to press the ‘TEMP’ button and then the ‘LIGHT’ button within three seconds of each other and this will change the modes from EC (economy mode), to SL (sleep mode) and finally to ST (standard mode) which is what you want.