How do I reset my BlueAnt Bluetooth?

How do I reset my BlueAnt Bluetooth?

Reset the BlueAnt device. Press and release the “Vol +,” “Vol -” and “Multi-Function” buttons all at the same time. The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.

How do I reset my BlueAnt X2?

How do I reset the X2?

1. With the X2 speaker off please press and hold the power button.
2. The start up sound will sound and the led will flash.
3. Keep holding the power button until you see the battery indicator lights turn off.
4. After the battery indicator lights have turned off the X2 will restart and say “Bluetooth”.

How do you clear a paired list on a BlueAnt q2?

Follow these steps to clear the Q2 pair list.

1. With the power ON…
2. Press the VOLUME UP, VOLUME DOWN and the MULTI-SELECT BUTTON.
3. The unit will reset, the pairings will be gone and you can re-connect and continue using your headset.

How do you delete a pair list on a BlueAnt q2?

How do I pair my BlueAnt ST3?

pressing the MFB as soon as your language is spoken on the SUPERTOOTH 3. The SUPERTOOTH 3 will then ask you to pair your phone. On your phone bluetooth menu, search for devices and select BlueAnt ST3 then enter 0000 as pincode. Press the MFB until the LED blinks red/blue.

How do I reset my BlueAnt commute 3?

How do I reset my Commute3? To Reset: Delete any existing pairing information from your phone and turn the phone off, and turn it back on after a few seconds to refresh the phone’s memory. Make sure the USB cable is not plugged in and the Commute 3 is not connected to any phone.

How do I reset my BlueAnt air pump?

Take the Left Pump Air 2 and place it in your ear, press and hold the button until the ear bud says “powering down” and let go of the button. Now press and hold the button again until the ear bud says “Pair me” then left go of the button. The light should be flashing blue rapidly.

How do I Reset my blueant to default settings?

Press and release the “Vol +,” “Vol -” and “Multi-Function” buttons all at the same time. The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.

Where are the volume and multi-function buttons on the blueant?

The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.

How do I clear the settings on my blueant Bluetooth headset?

Clearing the settings can be done by holding down a specific button combination on the headset. Open the Bluetooth settings on any devices the BlueAnt headset is currently connected to and elect to unpair the headset from those devices. Restart any devices the BlueAnt Bluetooth headset is connected to; this will clear the memory of those devices.

Why does the blueant Bluetooth device say the pair list is full?

The BlueAnt Bluetooth device has limited space for storing pairing information, which means that if you connect the device to too many phones, you may run out of room for additional pairing data. When this occurs, you hear the message “The Pair List Is Full” spoken in your ear.