What does show ip interface do?

What does show ip interface do?

The show ip interface command provides tons of useful information about the configuration and status of the IP protocol and its services, on all interfaces. The show ip interface brief command provides a quick status of the interfaces on the router, including their IP address, Layer 2 status, and Layer 3 status.

How do I find my IP interface?

To get a detailed listing of all the IP-related characteristics of an interface, use the show ip interface command.

Do you show ip interface brief?

The show IP interface brief command gives you the answers to these questions and is the best summary of the status, protocol and IP addresses of your interfaces. This command can be used in both User EXEC and Privileged EXEC mode. This command can be abbreviated sh ip int brie.

What command will show interfaces?

Use the show interfaces EXEC command to display statistics for all interfaces configured on the router or access server.

What is show tech command?

show tech-support command. It’s executed in the enable mode (Privileged. EXEC Mode). The command displays diagnosis information for technical support by. running relevant show commands on the hardware.

Which commands display the status of the port?

The show interfaces < port-list > command can be used to display the current link status and the port rate average over a 5 minute period.

How do I find my router’s interface?

How to access the router’s web interface

1. Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
2. Enter your login credentials in the fields provided. The default password is admin.
3. To know if you have successfully logged in to the web interface, the screen below should appear.

How do I find my IP configuration?

On an Android smartphone or tablet: Settings > Wireless & Networks (or “Network & Internet” on Pixel devices) > select the WiFi network that you’re connected to > Your IP address is displayed alongside other network information.

How do I get show tech output?

Procedures

1. Open PuTTY and enter the HostName (or IP address), and then select the Connection type.
2. Click Logging under the Session tree on the left.
3. Select Printable Output.
4. In the Log file name field, name the file and click Browse to select a folder for it to be saved in.
5. Click Open and log in to the switch.

How do you collect show tech?

When capturing a show tech-support from a telnet session, perform the following steps: Telnet to switch. Set your telnet client to capture text to a file (procedure varies based on the client). The display will now continuously scroll the data to the output file until the capture is complete.

Does Cisco Show Run command?

On Cisco Router/Switches:

1. Type “terminal length 0” in privileged mode to set your terminal to display without any breaks.
2. Type “show run” or “show start” to show the applicable config.
3. To display the config without lengthy certificate data, use “show run brief “.

How do I use show running config?

Show running-config: To display the configuration information currently running on the terminal, use the show running-config EXEC command. This command replaces the write terminal command.